Membrane Air Diffuser KamAir

Disc Diffuser have wide coverage of the surface which can maximize the aeration performance. With 3/4" MPT, the operation airflow can be up to 80L/min.

Model :
KAD215
KAD250
KAD320

HSI Multistage Centrifugal Blower

 

HSI offers a full range of multistage centrifugal blowers products with 13 models to choose from. We have the right blower for your application today and our Research and Development department is developing new models to meet your needs tomorrow.
Product performance ranges up to 25 PSI (1.7 Bar) pressure or to 18 inHg (457 mmHg) vacuum and flows from 100 to 40,000 CFM (170 to 70,000 m3/hr). HSI manufactures blower and process control systems as well as provides complete blower packages with accessories to meet a wide variety of applications.

Product Excellence :

•     High Efficiency
•     Clean Oil Free High Pressure Air
•     No Pulsation of Flow
•     Reliable and Simple to Maintain
•     Heavy Duty Design for Continuous Service
•     Very Low Sound Levels to Meet OSHA standards

ROOTS BLOWER LONGTECH

KEUNGGULAN ROOTS BLOWER LONGTECH

• Dengan system Rotor 3 sirip dan Double Helical Casing, membuat noise dan getaran yang sangat kecil dan dengan metode Endless Casing, bisa menjadi Low Energy.
• Tidak adanya campuran minyak saat bergerak, menghasilkan udara yang bersih dan tidak ada pencemaran disekitar area blower akibat dari Kabut dari minyak (Oil Mist).
• Dengan Rotor dan Shaft yang menyatu dan tidak ada gesekan, menyebabkan tidak akan ada perubahan kapabilitas Blower dan bisa beroperasinal terus-menerus dalam waktu yang panjang.
• Dapat digunakan pada kecepatan tinggi, sehingga sangat efektif serta sangat simple (Compact).
• Mempunyai struktur sederhana. Pengunaan Bearing special berfungsi memudahkan proses pencegahan trouble dengan memberikan Grease dan mempunyaai kekuatan (Durability) panjang.
• Dengan struktur Gear Oil yang bebas goncangan, menghindarkan terjadinya trouble kebocoran oli. 

Model :
LT-40
LT-50
LT-65
LT-80
LT-100
LT-125
LT-150
LT-200
LT-250
LT-300
LT-350
LT-400

EDWARDS VACUUM PUMP - E2M80 AZ IE3 ASIA 50/60HZ 200V 50/60HZ, 380V 60HZ (A36507934)

Edwards E2M series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapour. These direct drive rotary vane pumps are inherently compact and vibration free, and with their finger-proof fan and coupling housings they offer excellent operator protection.
A comprehensive range of accessories is available to allow use on a wide variety of vacuum applications.

Supplied with Ultragrade 70 Oil. Fomblin® must be purchased separately for PFPE prepared pumps E2MFX.

AEdwards E2M series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapour. These direct drive rotary vane pumps are inherently compact and vibration free, and with their finger-proof fan and coupling housings they offer excellent operator protection.
A comprehensive range of accessories is available to allow use on a wide variety of vacuum applications.

Supplied with Ultragrade 70 Oil. Fomblin® must be purchased separately for PFPE prepared pumps E2MFX.

Applications

•     Vacuum metallurgy processes
•     Thin film coating technologies
•     Pharmaceutical freeze drying
•     Refrigeration and air conditioning system evacuation, drying, and backfilling
•     Transformer and cable drying and impregnation, insulating oil treatment plant
•     Lamp manufacture
•     Cryogenic vessel evacuation
•     Vacuum drying and distillation in chemical industries
•     Semiconductor device manufacture
•     Backing pump for high vacuum applications

MULTI STAGE TURBINE PUMP

Features

• This product is a single-stage volute centrifugal pump with no guide vane and has simple and unique design to show high efficiency.
• This product is designed and manufactured to have static and dynamic balance for low noise and low vibration. 
• Model selection is easy because a series of standardized specifications are available.
• The compatibility of parts is good and supply of spare parts is easy; it has a horizontal suction and vertical exhaust single-stage structure. 
• Durable painting with heat treatment after application.
• TEFC 4-pole motor.
• 3-phase 220V/380V (DOL) and 3-phase 380V, 440V (Y-△).
• Insulation grade: F

Application : City water, water supply to boiler, factory and multistory building, cool/warm water circulation in the building, hydrant, drainage in the mine.

Standard Specifications

•     Flow rate: 4 ㎥/min (max)
•     Pump head: 180m (max)
•     Liquid temperature: 0℃ ~ 90℃ 
•     Outlet diameter: 40~120mm
•     Rotating direction: CW (Clockwise when seeing the pump at the driving unit)
•     Shaft seal: Packing type and mechanical seal type